Direct Digital Manufacturing: polymers and composites
Additive Fabrication is an advanced manufacturing technology in which the three-dimensional objects are built through the addition of material in a layer-by-layer fashion. The produced objects can be functional or simply serve for an conceptual evaluation of the desired product being development.
The Additive Manufacturing Laboratory is a space with equipment dedicated to the rapid automatic fabrication of physical objects.
 |
Laboratory 360 view ( Must log in your Google account for a 360 view ) |
Equipment:
|
uPrint
Description:
The additive manufacturing technique that uses this equipment is FDM (Fused Deposition Modeling). Ecological: work is a clean. It is considered e technology of “office”.
Specifications:
Dimension: 570 x 620 x 800 mm
Weight: 76 kg
Construction volume: 203 x 152 x 152 mm
Material:
Model: ABS Plus (termoplastic material)
Support: material after constructions of the finished part, is dissolved at a bath temperature ± 70ºC
Vflash
Description:
The additive manufacturing technique that uses this equipment is FTI (Film Transfer Imaging). Technology is considered an “office”. Construction of models in high quality. Accessible, fast and easy hardling.
Specifications:
Dimension: 660 x 685 x 787 mm
Weight: 66 kg
Construction volume: 228 x 171 x 203 mm
Layer thickness: 102µm
Material:
FTI-GN Material
Density: ~ 1.11 g/cm3
Tensile Strength: 33 MPa
Tensile Modulus: 1550 MPa
Elongation: 5.0%
Flexural strength: 53 MPa
Flexural modulus: 1700 MPa
UP
Description:
The additive manufacturing technique that uses this equipment is FDM (Fused Deposition Modeling). This equipmemt allows us to make colored pieces. It is considered an educational technology. Accessible, fast and easy hardling.
Specifications:
Dimension: 245 x 260 x 350 mm
Weigth: 5 kg
Construction volume: 140 x 140 x 135 mm
Layer thickness: 0.2, 0.25, 0.3, 0.35, 0.4 mm
Material: ABS Plastic (write)
BFB
Description:
The additive manufacturing technique that uses this equipment is FDM (Fused Deposition Modeling). This equipmemt allows us to make colored piecess. It is considered an educational technology. Accessible, fast and easy hardling.
Specifications:
Dimension: 600 x 600 x 700 mm
Weight: 38 kg
Construction volume: 100 x 100 x 210 mm (ABS) | 200 x 200 x 210 mm (PLA)
Material:
ABS (thermoplastic material)
PLA (biodegradable thermoplastic)
Zprint
Description:
Most Affordable, Quality 3D Models, Monochrome.
Specification:
Dimension: 740 x 790 x 1400 mm
Weight: 165 kg
Build size: 236 x 185 x 127 mm
Color: Monochrome (write)
Resolution: 300 x 450 dpi
Minimum feature size: 0,4 mm
Layer Thickness:0,1 mm
Number of jets: 304
Material:
High performance composite